Prince PRE-793
Product Description
Prince PRE-793 is a one part silicone sealant, with excellent weatherproof and non-corrosive to most building material.
Packaging
- 300ml/cartridge; 24 cartridges/ctn
- 590ml/sausage; 20 sausages/ctn
Applications
- Assembly for various kinds of aluminum alloy windows and doors;
- Joint and seal for interior decorative glass;
- General joint and seal.
Feature
- Single component, neutral-cure silicone;
- Excellent weatherproof performance;
- Non-corrosive to most building materials, assembly for aluminum alloy windows, doors and interior decorative glass
TYPICAL PHYSICAL PROPERTIES
| Prince Silicone Weatherproof Sealant PRE-793 | ||
|---|---|---|
| Property | Test Method | Value |
| Sag(slum) | GB/T13477 | Non-changed |
| Snap Time | GB/T13477 | 45 min |
| Extrusion | GB/T13477 | 128 ml/min |
| Tensile Modules | GB/T13477 | 0.78 Mpa |
| Tensile Proper | GB/T13477 | No damage |
| Hardness | GB/T13477 | 46 HsA |
| Peel Strength | GB/T13477 | 4.1 N/mm |
| Movement Capability (%) | ASTMC719 | ±25 |
| Aging Test | ASTMC719 | Passed |
| Storage Life | 27°C | 9 months |
Restriction of Usage
- Cannot be used as structural sealant;
- Not compatible with materials with grease or exudation;
- Unsuitable for airproof location, because it requires absorbing moisture in air to cure;
- Unsuitable for frosty or moist surface;
- Unsuitable for continuous flooding or entire-year moist places;
- Cannot be used on the substrate surface below 6℃ or above 40℃.
Technology Service
- We supply integrate data, technical consultation and free compatibility test.
- Solving problem in the course of using timely
Estimated Amount of Use
Please see following form of estimated amount of various joints:
The length of Prince PRE-793 Sealant 300ml can be extruded during application.
| Specification | Width (6 mm) |
Width (9 mm) |
Width (12mm) |
Width (15mm) |
Width (18mm) |
Width (21mm) |
Width (24mm) |
|---|---|---|---|---|---|---|---|
| Thickness (6mm) |
Length (16.38m) |
Length (10.92m) |
Length (8.19m) |
Length (6.55m) |
Length (5.46m) |
Length (4.68m) |
Length (4.09m) |
| Thickness (9mm) |
Length (7.28m) |
Length (5.46m) |
Length (4.37m) |
Length (3.64m) |
Length (3.12m) |
Length (2.73m) |
|
| Thickness (12mm) |
Length (4.09mm) |
Length (3.27m) |
Length (2.73m) |
Length (2.34m) |
Length (2.04m) |
Note: The actual amount of use may be different due to the joint design, installation position of pad material, repairing skill and wastage in application.
Procedure
Please see "Operation Instruction to Girafe Silicone Sealant"
Safety
- Silicone sealant will release volatile compound so that it could be harmful to health, therefore, please keep good ventilation at the construction site ;
- Silicone sealant will not release any harmful substance and not be harmful to health after cured;
- Keep uncured silicone sealant beyond children's reach. If getting into eyes, wash off with running water and consult a doctor;
Warranty
- As an ISO9001, ISO14001 certified company, we are committed to establish and implement the ISO9001 Quality Management System. We are recognized as manufacturer of silicone structural sealant for construction on August,2006;
- We will sign the Quality Guarantee with customers after they buy our products and confirm the construction organization and engineering.
Maintenance
- Generally there is no need to repair. If the seal joint is damaged, please remove the damaged silicone sealant, clean the surface of substrates, and fill up with silicone sealant.
- Girafe silicone sealants have good adhesion to cured sealant.
Attention
Information published in this instruction is correct. However, by no means can it be considered an absolute guarantee, as usage and application of the product in accordance with the instruction given and success in application is beyond our control and is depend on many factors. Customers should have a good knowledge of product and make independent judgments of optimal usage before application.